Ceramic femoral heads produce less wear of the opposing polyethylene than do metal femoral heads in wear simulation studies. This is a matched-pair analysis of the wear of ceramic and metal femoral heads on conventional polyethylene in uncemented total hip replacements in young, active patients at a minimum of fifteen years of follow-up.
While innovation drives advancement, it is not immune to failure. Previously, we reported a corrosion-related revision rate of 28% (23 of 81 total hip arthroplasties) among patients who received the Rejuvenate modular-neck stem implant with short-term follow-up. Because we observed a dramatic interval failure rate after our initial report, we undertook this study.
Our hypothesis was that a high-flexion rotating-platform posterior stabilized (RP-PS) design could maximize range of motion (ROM) and improve deep-flexion activities. Eighty-seven consecutive patients (109 knees) with high-flexion RP-PS design were prospectively followed up for a minimum of 3 years. Radiographic and clinical outcomes were analyzed using Knee Society Score criteria and Western Ontario and McMaster Universities Osteoarthritis Index.
Routine patella replacement with total knee arthroplasty has not been universally adopted because of associated patellofemoral complications such as anterior knee pain (AKP). In the proposed technique, the articular surface of the lateral facet of the patella is excised to the depth of the subchondral bone, and the medial facet is then cut parallel to the anterior surface. We evaluated any correlation between various radiographic parameters and AKP in 100 consecutive fixed-bearing posterior-stabilized total knee arthroplasties. There were no cases of fracture, avascular necrosis, subluxation, dislocation, patellar baja, or overstuffing of the patella. Anterior knee pain was present in 11% of cases, and no cases were severe or disabling. There were no correlations between AKP, range of motion, patellar size and shape, and any of the radiographic parameters.
The purpose of this study was to analyze wear rates of highly cross-linked polyethylene comparing the Martell and the Roman methods in 112 total hip arthroplasties in patients 65 years and younger, with a mean follow-up of 5.7 years. The mean wear rates in the Martell and Roman methods were 0.014 ± 0.05 mm/y and 0.011 ± 0.04 mm/y when including all values and 0.043 ± 0.028 mm/y and 0.038 ± 0.02 mm/y when negative values were assumed to be zero, respectively. Both Roman and Martell methods showed similar low wear rates with negative values. The Roman method had higher precision and was more user friendly because it required less steps to measure wear, especially when comparing with the manual feature of Martell method.
The effect of fixed spinal deformities on a functional pelvis from standing to sitting is not fully understood. We aimed to assess the change in preoperative sagittal pelvic tilt angle (SPTA) from standing to sitting in patients undergoing total hip arthroplasty, comparing flexible and fixed spinal deformities.
Electronic health record (EHR) technologies have improved the ease of access to structured clinical data. The standard means by which data are collected continues to be manual chart review. The authors compared the accuracy of manual chart review against modern electronic data warehouse queries. A manual chart review of the EHR was performed with medical record numbers and surgical admission dates for the 100 most recent inpatient venous thromboembolic events after total joint arthroplasty.
Orthopedic implant device sales representatives (“reps”) can provide intraoperative guidance based on their product knowledge, as part of their many responsibilities. However, for experienced high-volume arthroplasty surgeons, a representative may not be required in the room for most primary total knee arthroplasty (TKA) procedures. The goal of this study was to describe the authors’ experience with a modified rep model for primary TKA. Between January and December 2017, a total of 100 unilateral primary TKAs were performed with a modified rep model and compared with 100 primary TKAs that were performed before this protocol.
This study compared the postoperative analgesic efficacy of liposomal bupivacaine as a single-administration adductor canal block (ACB) vs periarticular injection (PAI) for pain control after total knee arthroplasty (TKA). From May 2016 to June 2017, a total of 70 unilateral TKA patients were randomized into 2 groups: PAI (extended-release bupivacaine 266 mg [20-mL vial] with 20 mL of 0.5% bupivacaine hydrochloride and normal saline to a total volume of 120 mL) and ACB (subsartorial saphenous nerve using extended-release bupivacaine 266 mg [20-mL vial]).
The purpose of this study was to determine if there is a difference in the number of diagnostic tests and interventions, pain and function scores, or satisfaction of patients discharged to inpatient rehabilitation facilities vs to home. From February to May 2015, 171 consecutive patients were prospectively recruited following primary total knee arthroplasty.
